Lifting Magnet
Lift and transfer iron scrap in scrap yards and ports, or process all types of steel scrap in steelworks and foundries. High temperature tolerance style and high duty cycle style(75%) are provided. Circular lifting magnet provided for lifting steel plates.
The coil resistance starts to heat after the electromagnet works for a while, which causes the temperature rise of the electromagnet and achieves heat balance. Meanwhile, the resistance value of the coil increases and reaches its maximum value at heat balance, and then the current is the rated current in the hot state.
Lifting and transferring iron scrap in scrap yards and ports, and handling all types of steel scrap in steelworks and foundries. It is the fastest way to move loose ferrous material without manual handling.
High temperature tolerance style and high duty cycle style at 75 percent, plus a circular lifting magnet designed specifically for lifting steel plates.
Coil resistance rises as the electromagnet works, causing the temperature to increase until it reaches heat balance. At that point the coil resistance is at its maximum and the current is the rated current in the hot state, which is normal operation rather than a fault.
By the type and size of scrap being lifted, the lift capacity required, the crane or material handler it will be mounted on, and how continuously it will run. Duty cycle is the specification most often underestimated.
Yes, with the high temperature tolerance style. Standard magnets should not be used on hot scrap, since heat shortens coil life considerably.
